Differences

This shows you the differences between two versions of the page.

--- en:cloud [2022/02/11 12:34] – grikiete
+++ en:cloud [2022/02/11 12:51] – grikiete
@@ Line 20: / Line 20: @@
 </code>
-Please delete unused VM's
+**NOTE:** If you don't use your VM please delete it.
 ----
@@ Line 108: / Line 108: @@
 | Resizing VM | If you have created a Virtual Machine and you need more resources, the following procedure is recommended: Perform any operation needed to prepare your Virtual Machine for shutting down, e.g. you may want to manually stop some services... 1. Poweroff the Virtual Machine. 2. Re-size the VM. 3. Resume the Virtual Machine using the new capacity. |
 | Sheduling | Most of the onevm commands accept the ‘–schedule’ option, allowing users to delay the actions until the given date and time. |
-**Note**. If you don't use your VM please shutdown, cancel or delete it. After 24 hours of running your VM could be shutdown automatically.
 ----
@@ Line 125: / Line 123: @@
 To use the redirects of TCP connections, you must add **TCP_PORT_FORWARDING** attribute value with the desired connections (max 4). After changing the attribute value, remember to restart your VM (PowerOff → Boot) and to check which connections were created. For example, if you want to open connection 80, type 80 and restart the VM. You will see TCP_PORT_FORWARDING value change to PORT: 80, where PORT is an external IP (PUBLIC_IP value) connection through which you can connect to the VM of your desired connection (80).
-On a VNET1 network, VM can receive not only the usual internal IPv4 address but also the globally accessible IPv6 address. More about connecting to [[http://ipv6.lt|IPv6]].
+On a **VNET1** network, VM can receive not only the usual internal **IPv4** address but also the globally accessible **IPv6** address. More about connecting to [[http://ipv6.lt|IPv6]].
+----
+=== Increasing Resources of VM ===
+To increase your VM resources, please write a request by email [[itapc@mif.vu.lt]].